Please select a category to show the Instrument Transducers that are most suited for you.
I would like my transducer to record.....
Transom Mount
The P66 features a 50/200 kHz, dual-frequency, single-ceramic element. This hydrodynamic housing with a rounded nose reduces the turbulence under the transducer’s face for accurate high-speed readings and clear display images.
Part Number: E26027-pz
In-Hull
The P79 in-hull transducer easily adjusts to hull dead rise angles up to 22º. This ensures that the beam is vertically oriented to receive echoes, resulting in accurate depth readings. Unlike traditional "puck" type transducers, the P79 consists of a base that is bonded to the hull and filled with liquid. The separate transducer then attaches to the base with a twist lock. The sound waves travel more efficiently though the liquid, giving the best possible performance.
Part Number: E26001-pz
Through-Hull
The B45 is the smallest and most economical, dual-frequency, bronze, stem transducer. Its streamlined shape deflects aerated water from the transducer's face for strong return echoes and clear display images. An Airmar High-Performance Fairing is recommended for all installations to get the best possible results.
Part Number: E26019-pz
Through-Hull
The plastic P7 isthe best performers in the Shorty™ Series designed for boats with limited headroom. Large, sensitive ceramics allow deeper echosounding. The low-profile P7 model is nearly flush and minimizes drag with only 5 mm (3/16") extending outside of the hull.
Part Number: E26009
Through-Hull
Depth only transducer compatible with aluminium and fibreglass hull materials. Cable 13.7m (45ft) cable with connector. Hole diameter for installation: 2"
Part Number: E26030
Through-Hull
Depth only transducer compatible with wood and fibreglass hull materials. Features a retractable depth insert
Part Number: M78717
Through-Hull
Inside the housing, the ceramic element is tilted for built-in deadrise compensation. The resulting vertical beam gives excellent echo returns for more accurate depth readings. The P19 without tilt has been the industry standard for many years — the choice when the hull's deadrise angle is minimal. All versions have a nearly flush housing minimizes drag with only 5 mm (3/16") extending outside of the hull.
Part Number: M78713-PZ-A
Through-Hull
Inside the housing, the ceramic element is tilted for built-in deadrise compensation. The resulting vertical beam gives excellent echo returns for more accurate depth readings. The P19 without tilt has been the industry standard for many years — the choice when the hull's deadrise angle is minimal. All versions have a nearly flush housing minimizes drag with only 5 mm (3/16") extending outside of the hull.
Part Number: T912
These transducers are compatible with ST40 and ST60+ displays on the SeaTalk1 network. The transducer simply connects to the back of one of the following instruments:
The transducers above are also compatible with ST70, ST70+ and i70 instrument displays on the SeaTalkng network via a depth pod or iTC-5 (both sold separately).
The transducer is connected to the pod or iTC-5 which converts the transducer signals to SeaTalkng. The pod or iTC-5 is then connected to your SeaTalkng backbone.
Pod or iTC-5?
Depth Pod
Pods are available for depth, speed and wind and the transducer should only be connected to the associated pod (i.e. depth transducer to depth pod).
The new iTC-5 can convert transducer signals for depth, speed/ temp, wind, compass and rudder reference all in the one unit, eliminating the need for multiple pods.
The transducers above are for depth only. If you have a Bidata or Tridata display you will also require a Speed and Temperature transducer. Alternatively, see our range of triducer transducers that combine Depth, Speed and Temperature within one transducer.
If you require more help selecting a transducer, view our "selecting a transducer" guide
Raymarine P66 Transom Mount Depth Transducer
Key Features
This model is depth only. Available for depth, speed and temperature - see part E26028-PZ
Product Number: E26027-PZ
Raymarine P79 In Hull Depth Transducer
Key Features
Product Number: E26001-PZ
Raymarine B45 Through Hull Depth Transducer
Key Features
Product Number: E26019-PZ
Raymarine P7 Shorty Depth Transducer
Key Features
Product Number: E26009
Raymarine D800/P17 Depth Transducer
Key Features
Product Number: E26030
Raymarine B17 Depth Transducer
Key Features
Product Number: M78717
Raymarine P19 0° Depth Transducer
Key Features
Compatible Models
Product Number: M78713-PZ-A
Raymarine Tacktick Depth Transducer
Key Features
Note: The T912 is not supplied with crimps
Product Number: T912
Transom Mount
The P66 TRIDUCER® multisensor features a 50/200 kHz, dual-frequency, single-ceramic element. This hydrodynamic housing with a rounded nose reduces the turbulence under the transducer’s face for accurate high-speed readings and clear display images.
Part Number: E26028-pz
Through-Hull
The B744V offers great triducer performance in a single thru-hull package. The included fairing block ensures reliable performance at speed.
Part Number: A26043
Through-Hull
The B744V offers great triducer performance in a single thru-hull package. The included fairing block ensures reliable performance at speed. The B744VL provides an extra 2.5" of stem length to accommodate thicker hull installations.
Part Number: A26044
Through-Hull
The D800 is a Smart™, TRIDUCER® multisensor that offers depth, speed, and temperature functions in one compact thru-hull fitting. Digital signal processing inside the housing provides depth, speed, and temperature data to a chart plotter, radar screen, or digital display, eliminating the need for a dedicated depth sounder. The wide port-starboard, fan shaped beam is able to find bottom even when installed on high-deadrise hulls or on sailboats when heeled.
Part Number: A22154
Through-Hull
The B17 High-Precision Temperature Sensor responds quickly and accurately to temperature changes. The 1" bronze button on the sensor's face and the specialized fast-response thermistor provide a five-second time constant and ±0.3º C accuracy. This Smart™ Sensor can output precision-temperature data to a fishfinder, chart plotter, digital display, or computer. It is ideal for commercial and sportfishing applications as it can help skippers detect thermal boundaries and eddies which attract bait concentrations and game fish.
Part Number: T910
These transducers are compatible with:
The transducer simply connects to the back of the instrument.
The transducers above can also be used to connect to a Depth and Speed Instrument on the SeaTalk1 network. For example:
In this case the depth cables from the transducer connect to the back of the Depth Display and the speed cables into the back of the Speed Display.
The transducers above are also compatible with ST70, ST70+ and i70 instrument displays on the SeaTalkng network via a depth and speed pod or an iTC-5 (pods and iTC-5 sold separately).
The transducer is connected either to the Speed and Depth pods or the iTC-5 which converts the transducer signals to SeaTalkng. The pods or iTC-5 is then connected to your SeaTalkng backbone.
Pod or iTC-5?
Pods are available for depth, speed and wind and the transducer should only be connected to the associated pod (i.e. depth transducer to depth pod).
For recording both depth and speed/temp with the transducers above you will require a depth pod and a speed pod.
The iTC-5 (image above right) can convert transducer signals for depth, speed/temp, wind, compass and rudder reference all in the one unit, eliminating the need for multiple pods.
If you require more help selecting a transducer, view our "selecting a transducer" guide
Raymarine P66 Transom Mount Depth / Speed and Temperature Transducer
Key Features
This model is speed, depth and temperature. Available for depth only - see part E26027-PZ
Product Number: E26028-PZ
Raymarine B744V Through Hull Depth / Speed and Temperature Transducer
Key Features
E66023 Fairing block sold separately
Product Number: A26043
Raymarine B744VL Through Hull Depth / Speed and Temperature Transducer
Key Features
Note: E66023 Fairing block sold separately.
Compatible models
Product Number: A26044
Raymarine D800/P17 Depth Transducer
Key Features
Product Number: A22154
Transom Mount
The ST69 is the ultimate, high-speed, transom-mounted sensor. The paddlewheel and housing do not project below the hull which minimizes spray and drag. And the design protects the sensor from damage by beaching, trailering, or objects in the water.
Part Number: E26005
Through-Hull
The ST800 speed and temperature sensor processes a digital signal inside the housing. Then this Smart™ Sensor sends the data to a chart plotter, radar screen, or digital display in either analog or NMEA 2000® formats. The plastic P120, bronze B120, and stainless steel SS520 housing options are available to meet most hull requirements.
Part Number: E25025
Through-Hull
The ST800 speed and temperature sensor processes a digital signal inside the housing. Then this Smart™ Sensor sends the data to a chart plotter, radar screen, or digital display in either analog or NMEA 2000® formats. The plastic P120, bronze B120, and stainless steel SS520 housing options are available to meet most hull requirements.
Part Number: E26031
Through-Hull
The ST800 speed and temperature sensor processes a digital signal inside the housing. Then this Smart™ Sensor sends the data to a chart plotter, radar screen, or digital display in either analog or NMEA 2000® formats. The plastic P120, bronze B120, and stainless steel SS520 housing options are available to meet most hull requirements.
Part Number: M78716
Through-Hull
The ST300, speed and temperature sensor, is low in price and short in size. As part of our Shorty™ Series, it is designed for boats with limited headroom. The P371, low-profile, housing option is nearly flush and minimizes drag with only 5 mm (3/16") extending outside of the hull. The P398 countersunk housing mounts flush, eliminating turbulence for more accurate speed readings.
Part Number: E26008
These transducers are compatible with ST40 and ST60+ displays on the SeaTalk1 network. The transducer simply connects to the back of one of the following instruments:
The transducers above are also compatible with ST70, ST70+ and i70 instrument displays on the SeaTalkng network via a speed pod or iTC-5 (both sold separately).
The transducer is connected to the pod or iTC-5 which converts the transducer signals to SeaTalkng. The pod or iTC-5 is then connected to your SeaTalkng backbone.
Pod or iTC-5?
Pods are available for depth, speed and wind and the transducer should only be connected to the associated pod (i.e. speed transducer to speed pod).
The new iTC-5 can convert transducer signals for depth, speed/ temp, wind, compass and rudder reference all in the one unit, eliminating the need for multiple pods.
The iTC-5 (image above right) can convert transducer signals for depth, speed/temp, wind, compass and rudder reference all in the one unit, eliminating the need for multiple pods.
The transducers above are for speed/temp only. If you have a Bidata or Tridata display you will also require a Depth transducer. Alternatively, see our range of triducer transducers that combine Depth, Speed and Temperature within one transducer.
If you require more help selecting a transducer, view our "selecting a transducer" guide
Raymarine ST69 Speed and Temperature Transducer
Key Features
Compatible Models
Product Number: E26005
Raymarine ST800/P120 Low Profile Through Hull Speed and Temperature Transducer
Key Features
Compatible Models
Product Number: E25025
Raymarine ST300/P371 ShortyTM Through Hull Speed and Temperature Transducer
Key Features
Compatible Models
Product Number: E26008
Raymarine ST800/B120 Low Profile Through Hull Transducer
Key Features
Compatible Models
Product Number: M78716
Raymarine ST800/P120 Low Profile Through Hull Speed and Temperature Transducer
Key Features
Compatible Models
Product Number: E26031
In Hull
The P79s in-hull transducer easily adjusts to hull deadrise angles up to 22º. This ensures that the beam is vertically oriented to receive echoes, resulting in accurate depth readings. Unlike traditional "puck" type transducers, the P79 consists of a base that is bonded to the hull and filled with liquid. The separate transducer then attaches to the base with a twist lock. The sound waves travel more efficiently though the liquid, giving the best possible performance.
Part Number:
A80373 (NMEA2000)
T70278 (with SeaTalkNG Adapter)
Through Hull
The DT800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 or NMEA 2000® display. The DT800 operates at a frequency of 235 kHz and can run simultaneously with other Airmar 50/200 kHz transducers on-board with no interference. The broadband ceramic delivers depth readings to 183 m (600'), as well as accurate shallow-water readings in as little as 500 mm (1.6').
Part Number: A22147
Through Hull
The DT800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 or NMEA 2000® display. The DT800 operates at a frequency of 235 kHz and can run simultaneously with other Airmar 50/200 kHz transducers on-board with no interference. The broadband ceramic delivers depth readings to 183 m (600'), as well as accurate shallow-water readings in as little as 500 mm (1.6').
Part Number: A22112
Through Hull
The DST800 is a Smart™, TRIDUCER® multisensor that offers depth, speed, and temperature functions in one compact thru-hull fitting. Digital signal processing inside the housing provides depth, speed, and temperature data to a chart plotter, radar screen, or digital display, eliminating the need for a dedicated depth sounder.
Additionally, the A22146 is no longer available, however if you want a through hull bronze, you can order the Plastic Transducer with the Bronze
Part Number: A22146
New Part Numbers: A22111 + T942
Through Hull
The DST800 is a Smart™, TRIDUCER® multisensor that offers depth, speed, and temperature functions in one compact thru-hull fitting. Digital signal processing inside the housing provides depth, speed, and temperature data to a chart plotter, radar screen, or digital display, eliminating the need for a dedicated depth sounder.
Part Number: A22111
Transducers are compatible with:
The transducers above may be used with ST40, i40, i50 and ST60+ displays (as repeaters only) on the SeaTalk1 network via a SeaTalk to SeaTalkng convertor (right).
Please note that ST40/i40/i50 and ST60+ displays will only work as repeaters if used with the above transducers. You cannot calibrate the transducers from these instruments. For calibration you would require a following SeaTalkng instrument: ST70, ST70+ or i70 display in your network.
If you don't have an ST70/ST70+ or i70 in your system, then we advise you use an analogue Transducer in one of the following Tabs:
If in doubt, contact your dealer who can offer further advice.
The transducers above may be used with the ST70, ST70+ and i70 on the SeaTalkng network. The transducer connects directly to the backbone - no pod or iTC-5 is required.
Raymarine P79S Smart™ In-Hull Transducer
Key Features
Product Number: A80373 (NMEA2000) | T70278 (with SeaTalkNGAdapter)
Raymarine DT800 Low Profile Through Hull Bronze Transducer
Key Features
Operates at 235kHz so there is no interference with your 50/200 kHz fishfinder transducer.
Airmar's Smart™ Sensors have embedded microelectronics, meaning the signal is processed from within the transducer itself, eliminating the need for an ST70 transducer pod.
Compatible Models
Product Number: A22147
Raymarine DT800 Low Profile Through Hull Plastic Transducer
Key Features
Operates at 235kHz so there is no interference with your 50/200 kHz fishfinder transducer.
Airmar's Smart™ Sensors have embedded microelectronics, meaning the signal is processed from within the transducer itself, eliminating the need for an ST70 transducer pod.
Compatible Models
Product Number: A22112
Raymarine DST800 Low Profile Through Hull Bronze Triducer
Key Features
Operates at 235kHz so there is no interference with your 50/200 kHz fishfinder transducer.
Airmar's Smart™ Sensors have embedded microelectronics, meaning the signal is processed from within the transducer itself, eliminating the need for an ST70 transducer pod or an ITC-5.
Compatible Models
Product Number: A22146
Raymarine DT800 Low Profile Through Hull Plastic Triducer
Key Features
Operates at 235kHz so there is no interference with your 50/200 kHz fishfinder transducer.
Airmar's Smart™ Sensors have embedded microelectronics, meaning the signal is processed from within the transducer itself, eliminating the need for an ST70 transducer pod or ITC-5.
Compatible Models
Product Number: A22111
Wind Speed and Angle
Part Number: Z195
Wind Speed and Angle
Part Number: E22078 (0m cable) | E22079 (50 cable)
Angle
Part Number: M81105
In a wind system you can choose between a Rotavecta transducer or a Wind Vane transducer.
The Rotavecta wind transducer is compatible with the ST40 (retired), i40, i60 and ST60+ (retired) wind instruments on the SeaTalk1 network. The transducer simply connects to the back of one of the following instruments:
The Wind Vane transducer is compatible with the ST60+ or i60 Wind Instrument on the SeaTalk1 network.
SeaTalkng
Both the Rotavecta and Wind Vane transducers are compatible with the i70, ST70 and ST70+ (retired) instruments on the SeaTalkng network via an iTC-5 transducer converter (sold separately). The transducer is connected to the iTC-5 which converts the transducer signals to SeaTalkng. The iTC-5 is then connected to your SeaTalkng backbone. The RotaVecta and Windvane transducers can also be connected directly to the back of an i60 Wind on the STng network.
The Wind Vane transducer can also use a ST70 wind pod to connect to the SeaTalkng network.
The Fluxgate Compass is now retired and no longer supported. The following information is for reference purposes only.
SeaTalk1
The Fluxgate Compass transducer is compatible with the ST40 and ST60+ instruments on the SeaTalk1 network. The transducer simply connects to the back of one of the following instruments:
SeaTalkng
The Fluxgate Compass transducer is compatible with the i70 , ST70 and ST70+ (retired) instruments on the SeaTalkng network via an iTC-5 transducer converter (sold separately). The transducer is connected to the iTC-5 which converts the transducer signals to SeaTalkng. The iTC-5 is then connected to your SeaTalkng backbone.
Note that if your system contains an SPX autopilot the Fluxgate Compass should connect directly to the course computer and not the iTC-5.
SeaTalk1
The Rudder Reference transducer is compatible with the ST60+ instruments on the SeaTalk1 network. The transducer simply connects to the back of one of the ST60+ Rudder Angle Indicator instrument.
SeaTalkng
The Rudder Reference transducer is compatible with the i70, ST70 and ST70+ (retired) instruments on the SeaTalkng network via an iTC-5 transducer converter(sold separately). The transducer is connected to the iTC-5 which converts the transducer signals to SeaTalkng. The iTC-5 is then connected to your SeaTalkng backbone.
Note that if your system contains an SPX or Evolution autopilot the Rudder Reference should connect directly to the course computer/ACU and not the iTC-5.
If you require more help selecting a transducer, view our "selecting a transducer" guide
Raymarine RotaVecta Wind Transducer
Key Features
Compatible Models
Product Number: Z195
Raymarine Wind Vane Transducer
Key Features
Compatible Models
Product Number: E22078(30m) E22079 (50m)
Fluxgate Compass Transducer
Compatible Models
Product Number: M81190
Rudder Angle Transducer
Compatible Models
Product Number: M81105
Transducer installation guides and technical specifications are available on the Airmar website. Note that these documents are owned and controlled by Airmar. Raymarine takes no responsibility for any information provided on the Airmar website or any of the documents available on the website.
Transom Mount
The P66 features a 50/200 kHz, dual-frequency, single-ceramic element. This hydrodynamic housing with a rounded nose reduces the turbulence under the transducer’s face for accurate high-speed readings and clear display images.
Part Number: E26027-pz
In-Hull
The P79 in-hull transducer easily adjusts to hull dead rise angles up to 22º. This ensures that the beam is vertically oriented to receive echoes, resulting in accurate depth readings. Unlike traditional "puck" type transducers, the P79 consists of a base that is bonded to the hull and filled with liquid. The separate transducer then attaches to the base with a twist lock. The sound waves travel more efficiently though the liquid, giving the best possible performance.
Part Number: E26001-pz
Through-Hull
The B45 is the smallest and most economical, dual-frequency, bronze, stem transducer. Its streamlined shape deflects aerated water from the transducer's face for strong return echoes and clear display images. An Airmar High-Performance Fairing is recommended for all installations to get the best possible results.
Part Number: E26019-pz
Through-Hull
The plastic P7 isthe best performers in the Shorty™ Series designed for boats with limited headroom. Large, sensitive ceramics allow deeper echosounding. The low-profile P7 model is nearly flush and minimizes drag with only 5 mm (3/16") extending outside of the hull.
Part Number: E26009
Through-Hull
Depth only transducer compatible with aluminium and fibreglass hull materials. Cable 13.7m (45ft) cable with connector. Hole diameter for installation: 2"
Part Number: E26030
Through-Hull
Depth only transducer compatible with wood and fibreglass hull materials. Features a retractable depth insert
Part Number: M78717
Through-Hull
Inside the housing, the ceramic element is tilted for built-in deadrise compensation. The resulting vertical beam gives excellent echo returns for more accurate depth readings. The P19 without tilt has been the industry standard for many years — the choice when the hull's deadrise angle is minimal. All versions have a nearly flush housing minimizes drag with only 5 mm (3/16") extending outside of the hull.
Part Number: M78713-PZ-A
Through-Hull
Inside the housing, the ceramic element is tilted for built-in deadrise compensation. The resulting vertical beam gives excellent echo returns for more accurate depth readings. The P19 without tilt has been the industry standard for many years — the choice when the hull's deadrise angle is minimal. All versions have a nearly flush housing minimizes drag with only 5 mm (3/16") extending outside of the hull.
Part Number: T912
These transducers are compatible with ST40 and ST60+ displays on the SeaTalk1 network. The transducer simply connects to the back of one of the following instruments:
The transducers above are also compatible with ST70, ST70+ and i70 instrument displays on the SeaTalkng network via a depth pod or iTC-5 (both sold separately).
The transducer is connected to the pod or iTC-5 which converts the transducer signals to SeaTalkng. The pod or iTC-5 is then connected to your SeaTalkng backbone.
Pod or iTC-5?
Depth Pod
Pods are available for depth, speed and wind and the transducer should only be connected to the associated pod (i.e. depth transducer to depth pod).
The new iTC-5 can convert transducer signals for depth, speed/ temp, wind, compass and rudder reference all in the one unit, eliminating the need for multiple pods.
The transducers above are for depth only. If you have a Bidata or Tridata display you will also require a Speed and Temperature transducer. Alternatively, see our range of triducer transducers that combine Depth, Speed and Temperature within one transducer.
If you require more help selecting a transducer, view our "selecting a transducer" guide
Raymarine P66 Transom Mount Depth Transducer
Key Features
This model is depth only. Available for depth, speed and temperature - see part E26028-PZ
Product Number: E26027-PZ
Raymarine P79 In Hull Depth Transducer
Key Features
Product Number: E26001-PZ
Raymarine B45 Through Hull Depth Transducer
Key Features
Product Number: E26019-PZ
Raymarine P7 Shorty Depth Transducer
Key Features
Product Number: E26009
Raymarine D800/P17 Depth Transducer
Key Features
Product Number: E26030
Raymarine B17 Depth Transducer
Key Features
Product Number: M78717
Raymarine P19 0° Depth Transducer
Key Features
Compatible Models
Product Number: M78713-PZ-A
Raymarine Tacktick Depth Transducer
Key Features
Note: The T912 is not supplied with crimps
Product Number: T912
Transom Mount
The P66 TRIDUCER® multisensor features a 50/200 kHz, dual-frequency, single-ceramic element. This hydrodynamic housing with a rounded nose reduces the turbulence under the transducer’s face for accurate high-speed readings and clear display images.
Part Number: E26028-pz
Through-Hull
The B744V offers great triducer performance in a single thru-hull package. The included fairing block ensures reliable performance at speed.
Part Number: A26043
Through-Hull
The B744V offers great triducer performance in a single thru-hull package. The included fairing block ensures reliable performance at speed. The B744VL provides an extra 2.5" of stem length to accommodate thicker hull installations.
Part Number: A26044
Through-Hull
The D800 is a Smart™, TRIDUCER® multisensor that offers depth, speed, and temperature functions in one compact thru-hull fitting. Digital signal processing inside the housing provides depth, speed, and temperature data to a chart plotter, radar screen, or digital display, eliminating the need for a dedicated depth sounder. The wide port-starboard, fan shaped beam is able to find bottom even when installed on high-deadrise hulls or on sailboats when heeled.
Part Number: A22154
Through-Hull
The B17 High-Precision Temperature Sensor responds quickly and accurately to temperature changes. The 1" bronze button on the sensor's face and the specialized fast-response thermistor provide a five-second time constant and ±0.3º C accuracy. This Smart™ Sensor can output precision-temperature data to a fishfinder, chart plotter, digital display, or computer. It is ideal for commercial and sportfishing applications as it can help skippers detect thermal boundaries and eddies which attract bait concentrations and game fish.
Part Number: T910
These transducers are compatible with:
The transducer simply connects to the back of the instrument.
The transducers above can also be used to connect to a Depth and Speed Instrument on the SeaTalk1 network. For example:
In this case the depth cables from the transducer connect to the back of the Depth Display and the speed cables into the back of the Speed Display.
The transducers above are also compatible with ST70, ST70+ and i70 instrument displays on the SeaTalkng network via a depth and speed pod or an iTC-5 (pods and iTC-5 sold separately).
The transducer is connected either to the Speed and Depth pods or the iTC-5 which converts the transducer signals to SeaTalkng. The pods or iTC-5 is then connected to your SeaTalkng backbone.
Pod or iTC-5?
Pods are available for depth, speed and wind and the transducer should only be connected to the associated pod (i.e. depth transducer to depth pod).
For recording both depth and speed/temp with the transducers above you will require a depth pod and a speed pod.
The iTC-5 (image above right) can convert transducer signals for depth, speed/temp, wind, compass and rudder reference all in the one unit, eliminating the need for multiple pods.
If you require more help selecting a transducer, view our "selecting a transducer" guide
Raymarine P66 Transom Mount Depth / Speed and Temperature Transducer
Key Features
This model is speed, depth and temperature. Available for depth only - see part E26027-PZ
Product Number: E26028-PZ
Raymarine B744V Through Hull Depth / Speed and Temperature Transducer
Key Features
E66023 Fairing block sold separately
Product Number: A26043
Raymarine B744VL Through Hull Depth / Speed and Temperature Transducer
Key Features
Note: E66023 Fairing block sold separately.
Compatible models
Product Number: A26044
Raymarine D800/P17 Depth Transducer
Key Features
Product Number: A22154
Transom Mount
The ST69 is the ultimate, high-speed, transom-mounted sensor. The paddlewheel and housing do not project below the hull which minimizes spray and drag. And the design protects the sensor from damage by beaching, trailering, or objects in the water.
Part Number: E26005
Through-Hull
The ST800 speed and temperature sensor processes a digital signal inside the housing. Then this Smart™ Sensor sends the data to a chart plotter, radar screen, or digital display in either analog or NMEA 2000® formats. The plastic P120, bronze B120, and stainless steel SS520 housing options are available to meet most hull requirements.
Part Number: E25025
Through-Hull
The ST800 speed and temperature sensor processes a digital signal inside the housing. Then this Smart™ Sensor sends the data to a chart plotter, radar screen, or digital display in either analog or NMEA 2000® formats. The plastic P120, bronze B120, and stainless steel SS520 housing options are available to meet most hull requirements.
Part Number: E26031
Through-Hull
The ST800 speed and temperature sensor processes a digital signal inside the housing. Then this Smart™ Sensor sends the data to a chart plotter, radar screen, or digital display in either analog or NMEA 2000® formats. The plastic P120, bronze B120, and stainless steel SS520 housing options are available to meet most hull requirements.
Part Number: M78716
Through-Hull
The ST300, speed and temperature sensor, is low in price and short in size. As part of our Shorty™ Series, it is designed for boats with limited headroom. The P371, low-profile, housing option is nearly flush and minimizes drag with only 5 mm (3/16") extending outside of the hull. The P398 countersunk housing mounts flush, eliminating turbulence for more accurate speed readings.
Part Number: E26008
These transducers are compatible with ST40 and ST60+ displays on the SeaTalk1 network. The transducer simply connects to the back of one of the following instruments:
The transducers above are also compatible with ST70, ST70+ and i70 instrument displays on the SeaTalkng network via a speed pod or iTC-5 (both sold separately).
The transducer is connected to the pod or iTC-5 which converts the transducer signals to SeaTalkng. The pod or iTC-5 is then connected to your SeaTalkng backbone.
Pod or iTC-5?
Pods are available for depth, speed and wind and the transducer should only be connected to the associated pod (i.e. speed transducer to speed pod).
The new iTC-5 can convert transducer signals for depth, speed/ temp, wind, compass and rudder reference all in the one unit, eliminating the need for multiple pods.
The iTC-5 (image above right) can convert transducer signals for depth, speed/temp, wind, compass and rudder reference all in the one unit, eliminating the need for multiple pods.
The transducers above are for speed/temp only. If you have a Bidata or Tridata display you will also require a Depth transducer. Alternatively, see our range of triducer transducers that combine Depth, Speed and Temperature within one transducer.
If you require more help selecting a transducer, view our "selecting a transducer" guide
Raymarine ST69 Speed and Temperature Transducer
Key Features
Compatible Models
Product Number: E26005
Raymarine ST800/P120 Low Profile Through Hull Speed and Temperature Transducer
Key Features
Compatible Models
Product Number: E25025
Raymarine ST300/P371 ShortyTM Through Hull Speed and Temperature Transducer
Key Features
Compatible Models
Product Number: E26008
Raymarine ST800/B120 Low Profile Through Hull Transducer
Key Features
Compatible Models
Product Number: M78716
Raymarine ST800/P120 Low Profile Through Hull Speed and Temperature Transducer
Key Features
Compatible Models
Product Number: E26031
In Hull
The P79s in-hull transducer easily adjusts to hull deadrise angles up to 22º. This ensures that the beam is vertically oriented to receive echoes, resulting in accurate depth readings. Unlike traditional "puck" type transducers, the P79 consists of a base that is bonded to the hull and filled with liquid. The separate transducer then attaches to the base with a twist lock. The sound waves travel more efficiently though the liquid, giving the best possible performance.
Part Number:
A80373 (NMEA2000)
T70278 (with SeaTalkNG Adapter)
Through Hull
The DT800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 or NMEA 2000® display. The DT800 operates at a frequency of 235 kHz and can run simultaneously with other Airmar 50/200 kHz transducers on-board with no interference. The broadband ceramic delivers depth readings to 183 m (600'), as well as accurate shallow-water readings in as little as 500 mm (1.6').
Part Number: A22147
Through Hull
The DT800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 or NMEA 2000® display. The DT800 operates at a frequency of 235 kHz and can run simultaneously with other Airmar 50/200 kHz transducers on-board with no interference. The broadband ceramic delivers depth readings to 183 m (600'), as well as accurate shallow-water readings in as little as 500 mm (1.6').
Part Number: A22112
Through Hull
The DST800 is a Smart™, TRIDUCER® multisensor that offers depth, speed, and temperature functions in one compact thru-hull fitting. Digital signal processing inside the housing provides depth, speed, and temperature data to a chart plotter, radar screen, or digital display, eliminating the need for a dedicated depth sounder.
Additionally, the A22146 is no longer available, however if you want a through hull bronze, you can order the Plastic Transducer with the Bronze
Part Number: A22146
New Part Numbers: A22111 + T942
Through Hull
The DST800 is a Smart™, TRIDUCER® multisensor that offers depth, speed, and temperature functions in one compact thru-hull fitting. Digital signal processing inside the housing provides depth, speed, and temperature data to a chart plotter, radar screen, or digital display, eliminating the need for a dedicated depth sounder.
Part Number: A22111
Transducers are compatible with:
The transducers above may be used with ST40, i40, i50 and ST60+ displays (as repeaters only) on the SeaTalk1 network via a SeaTalk to SeaTalkng convertor (right).
Please note that ST40/i40/i50 and ST60+ displays will only work as repeaters if used with the above transducers. You cannot calibrate the transducers from these instruments. For calibration you would require a following SeaTalkng instrument: ST70, ST70+ or i70 display in your network.
If you don't have an ST70/ST70+ or i70 in your system, then we advise you use an analogue Transducer in one of the following Tabs:
If in doubt, contact your dealer who can offer further advice.
The transducers above may be used with the ST70, ST70+ and i70 on the SeaTalkng network. The transducer connects directly to the backbone - no pod or iTC-5 is required.
Raymarine P79S Smart™ In-Hull Transducer
Key Features
Product Number: A80373 (NMEA2000) | T70278 (with SeaTalkNGAdapter)
Raymarine DT800 Low Profile Through Hull Bronze Transducer
Key Features
Operates at 235kHz so there is no interference with your 50/200 kHz fishfinder transducer.
Airmar's Smart™ Sensors have embedded microelectronics, meaning the signal is processed from within the transducer itself, eliminating the need for an ST70 transducer pod.
Compatible Models
Product Number: A22147
Raymarine DT800 Low Profile Through Hull Plastic Transducer
Key Features
Operates at 235kHz so there is no interference with your 50/200 kHz fishfinder transducer.
Airmar's Smart™ Sensors have embedded microelectronics, meaning the signal is processed from within the transducer itself, eliminating the need for an ST70 transducer pod.
Compatible Models
Product Number: A22112
Raymarine DST800 Low Profile Through Hull Bronze Triducer
Key Features
Operates at 235kHz so there is no interference with your 50/200 kHz fishfinder transducer.
Airmar's Smart™ Sensors have embedded microelectronics, meaning the signal is processed from within the transducer itself, eliminating the need for an ST70 transducer pod or an ITC-5.
Compatible Models
Product Number: A22146
Raymarine DT800 Low Profile Through Hull Plastic Triducer
Key Features
Operates at 235kHz so there is no interference with your 50/200 kHz fishfinder transducer.
Airmar's Smart™ Sensors have embedded microelectronics, meaning the signal is processed from within the transducer itself, eliminating the need for an ST70 transducer pod or ITC-5.
Compatible Models
Product Number: A22111
Wind Speed and Angle
Part Number: Z195
Wind Speed and Angle
Part Number: E22078 (0m cable) | E22079 (50 cable)
Angle
Part Number: M81105
In a wind system you can choose between a Rotavecta transducer or a Wind Vane transducer.
The Rotavecta wind transducer is compatible with the ST40 (retired), i40, i60 and ST60+ (retired) wind instruments on the SeaTalk1 network. The transducer simply connects to the back of one of the following instruments:
The Wind Vane transducer is compatible with the ST60+ or i60 Wind Instrument on the SeaTalk1 network.
SeaTalkng
Both the Rotavecta and Wind Vane transducers are compatible with the i70, ST70 and ST70+ (retired) instruments on the SeaTalkng network via an iTC-5 transducer converter (sold separately). The transducer is connected to the iTC-5 which converts the transducer signals to SeaTalkng. The iTC-5 is then connected to your SeaTalkng backbone. The RotaVecta and Windvane transducers can also be connected directly to the back of an i60 Wind on the STng network.
The Wind Vane transducer can also use a ST70 wind pod to connect to the SeaTalkng network.
The Fluxgate Compass is now retired and no longer supported. The following information is for reference purposes only.
SeaTalk1
The Fluxgate Compass transducer is compatible with the ST40 and ST60+ instruments on the SeaTalk1 network. The transducer simply connects to the back of one of the following instruments:
SeaTalkng
The Fluxgate Compass transducer is compatible with the i70 , ST70 and ST70+ (retired) instruments on the SeaTalkng network via an iTC-5 transducer converter (sold separately). The transducer is connected to the iTC-5 which converts the transducer signals to SeaTalkng. The iTC-5 is then connected to your SeaTalkng backbone.
Note that if your system contains an SPX autopilot the Fluxgate Compass should connect directly to the course computer and not the iTC-5.
SeaTalk1
The Rudder Reference transducer is compatible with the ST60+ instruments on the SeaTalk1 network. The transducer simply connects to the back of one of the ST60+ Rudder Angle Indicator instrument.
SeaTalkng
The Rudder Reference transducer is compatible with the i70, ST70 and ST70+ (retired) instruments on the SeaTalkng network via an iTC-5 transducer converter(sold separately). The transducer is connected to the iTC-5 which converts the transducer signals to SeaTalkng. The iTC-5 is then connected to your SeaTalkng backbone.
Note that if your system contains an SPX or Evolution autopilot the Rudder Reference should connect directly to the course computer/ACU and not the iTC-5.
If you require more help selecting a transducer, view our "selecting a transducer" guide
Raymarine RotaVecta Wind Transducer
Key Features
Compatible Models
Product Number: Z195
Raymarine Wind Vane Transducer
Key Features
Compatible Models
Product Number: E22078(30m) E22079 (50m)
Fluxgate Compass Transducer
Compatible Models
Product Number: M81190
Rudder Angle Transducer
Compatible Models
Product Number: M81105
Transducer installation guides and technical specifications are available on the Airmar website. Note that these documents are owned and controlled by Airmar. Raymarine takes no responsibility for any information provided on the Airmar website or any of the documents available on the website.
2019 © FLIR Systems All rights reserved. Privacy Policy|Copyright Policy|Terms of Use