Software updates for Raymarine products are not currently available.
Please visit this page at a later date to download any updates.
Fixes Power up issue
This includes the following enhancements:
Finnish, Portuguese & Polish Language support added.
Colour Modes 1/2/3, red/black and Inverse Colour Palettes now replace original to align with ST70+ Colour Modes.
System Brightness added. – Brightness can now be controlled globally via an ST70 or ST70+ Display & Keypad
Brightness Grouping added. – Can now be control individually, globally or within a defined Group of ST70 & ST70+.
Correction to E2 device write problem. – Corrects potential loss of internal / setup memory after long term use.
Changes to Bootloader (v0.21) & (v1.0) Software:
Bootloader (v0.21) assigns a unique ID: – It is now impossible to inadvertently program an ST70P with ST70I software and visa versa. This applies to programming with a G Series or any other compatible MFD. Note, after loading Bootloader v0.21 the software can not be downgraded to previous versions.
Bootloader (v1.0) includes the changes in (v0.21) and also allows easier software downloads with large Seatalk NG systems. - Note with previous Bootloader you may have to reduce the number of NG products on the bus.
Changes to Raymarine Splash Screen (v1.0):
Splash Screen graphics have now changed to align with ST70+, A Series, & C / E Series Widescreen MFD’s.
Mastership default is set to OFF.
Depth flashing with Volvo EVC Engines now cured.
Trip can now be reset.
Datum table correction.
Bootloader (v0.21) now assigns unique ID: – It is now impossible to inadvertently program an ST70I with ST70P software and visa versa. This applies to programming with a G Series or any other compatible MFD.
After loading Bootloader v0.21 the software can not be downgraded to previous versions.
Seatalk corruption when bridged from Seatalk NG fixed
SR50 software filter added.
Compatibility with Airmar Transducers DST800 and DT800