• M100/M200 Thermal Camera support
• Navionics Dock-to-Dock and SonarChart live improvements - where the Chart could show as 'Invalid' with no System Date present
• gS-Series platform update to support long hold touch for Digital Switching

Changes to .zip file contents since initial release:

• June 2017 - VHF Zip file updated to v1.39 and VH1.09 for Ray50/52/60/70 and 2nd Station Handset - More Info
• Dec 2017 - Instruments ISO updated to include v3.11 for i70/i70s - More Info
• Dec 2017 - VHF Zip file updated to v1.40app/v2.16boot and  VH1.09 for Ray50/52/60/70 and 2nd Station Handset - More Info
• Dec 2017 - Fishfinder ISO updated to v13.34 for CP370 - More Info

• Resolves an issue seen where the MFD can slow down after a prolonged period of time. This only affects MFDs integrated to a Digital Switching system.
• Added support for the CPT-S Transducers on the Embedded DownVision Sonar Modules (x8)

• September 2016     - Radar ISO updated to include v1.50 for Quantum - More Info  
• September 2016     - Adaptor ISO updated to include v2.03 for STng Converter - More Info
• January 2017           - Radar ISO updated to include v1.51 for Quantum - More Info
• March 2017             - Instruments ISO updated to include v3.08 for i70/i70s - More Info

• Minimum recommended version for Quantum Radar functionality
• Navionics Dock-to-Dock Autorouting
• Navionics SonarChart^TM Live on MFD & Advanced Map Options
• Create personal 1 foot HD bathymetry maps in real time
• Fishing Range and Shallow Water Highlight
• GRIB View global weather app
• Subscribe to Theyr High Resolution global weather forecasts downloaded over MFD internet connection
• Display free standard GRIB forecast files read from a microSD card
• Support for C-MAP active Captain data from C-MAP charts
• NMEA 2000 Entertainment Device Control with Rockford Fosgate Integration
• CHIRP SideVision precision waypoint placement
• Digital Switching Enhancements
• Fusion Link Improvements
• Automatic Chart Selection
• Upon opening chart app instance the app will automatically check for cards in the card reader and open the appropriate chart. If multiple chart cards are installed, the app will open by priority of Lighthouse, then Navionics or CMAP.
• Password protected Home Screen protects home screen icons and data displays
• Sonar improvements for Bait School lockup/ Improved bottom tracking
• Volt and Current Data cells support extra digits (i.e. 200Volts)
• NMEA2000 Compliance – MFDs now transmit PGN126993 (Heartbeat)
• Support for P79S Added (In-Hull Smart Transducer calibration)
• Other enhancements and fixes

Click here for more information on this release

 Changes to .zip file contents since initial release: 

• June 2016 - Pilot ISO updated to include v3.06 for p70/p70R - More Info
• June 2016 - Instrument ISO updated to include v3.06 for i70/p70/p70R - More Info
• Aug 2016  - Pilot ISO updated to include v3.07 for p70/p70R - More Info  
• Aug 2016  - Instrument ISO updated to include v3.07 for i70/i70s/p70/p70R - More Info  
• Aug 2016  - Radios ISO added to include v1.35 for Ray50,Ray52,Ray60,Ray70,2nd Station Handset - More Info  

• Quantum Radar support started - we recommend R17 is used for full Quantum Support
• Search and Rescue Patterns (SAR)
• Sector, Expanding Square, Parallel/Creeping Line
• Amended Track Behavior
• Enhanced Waypoint Lat/Lon entry via Rotary/OK input method
• Improvement to notification and selection of Master/Repeater
• SiriusXM Nowrad time stamp and graphic refresh issue (SR150 only)
• SiriusXM weather app crash when rapidly ranging or panning
• Polars created on MAC can now be imported
• Tide station dialogue immediately closes upon opening via Find Nearest
• CP470-CP570 speed/temp transducer selection via MFD Menu
• No COG data value in Croatian
• Fixed issue where Demo video would freeze
• Other fixes and minor improvements
• Support for the CPT-S Transducers added

Click here for more information on this release

• Initial Release for the eS97 & eS127 with embedded ClearPulse^TM Digital Sonar technology.

• Collision awareness improvements
  • New Target Intercept feature
  • New guard zone & dangerous targets dialogs
  • New AIS target symbols to represent different types and status of AIS targets
  • New target vector Relative/True toggle
  • New tracked target dialog
• New FLIR AX8 Thermal Camera Integration
• New Wi-Fi Network Connectivity (Wi-Fi Networks & Wi-Fi sharing)
• New Update System Software over the internet
• SR150 SiriusXM Marine weather Enhancements
• Improved CMAP presentation of chart objects on ranging
• Additional Language support for Bahasa Indonesia, Latvia, Lithuanian & Thai
• Alarm Tone changed for improved alertness (excludes a-Series)
• Various other Fixes and Improvements

Click here for more information on this release

• Production release only for eS9/eS12 product launch

• Added sail racing features including Laylines, importing Polar tables and more
• Added support for C-MAP by Jeppesen Easy Routing feature using C-MAP 4D MAX+ cartography
• Added new Minimum Safe Beam & Minimum Safe Height system settings to enable implementation of Easy Routing
• Expanded FUSION-Link™ media support, including NMEA 2000 product connection
• Added support for CP470 & CP570 sonar modules & improved feature support
• Support for Archive.fsh removed

Click here for more information on this release

Changes to .zip file contents since initial release:

• June 2015 - Platform updated to v14.18 from v14.16
• June 2015 - Platform updated to v14.20 from v14.18 to include new touch screen driver (Producton Release only)
• July 2015 - Pilot ISO updated to include v1.12 ACU software - More info
• Aug 2015 - Adapter ISO updated to include v1.20 ECI-100 - More info
• Sept 2015 - VHF ISO updated to include v1.22 Ray50, Ray60, Ray70 VHFs - More info

• Jeppesen C-MAP 4D MAX / 4D MAX+ integration
• Improved Chart Object Hot Spotting
• New GoTo Navigation function
• SiriusXM - NOAA Marine Zone Boundary (Updates issued Dec 1, 2014)
• Improved Software Update process
• Various fixes and minor improvements

Click here for more information on this release

Click here to download R13

• Added support for viewing up to 4 cameras simultaneously using quad view page layout
• Added support for use of 2 radar scanner systems on the same network
• Added support for extreme latitudes, up to 82o North, in the radar application
• Increased support for maximum number of batteries to 16
• Enhancements to the ‘Save & Restore’ settings
• Consolidation of the software update file-set
• Support of additional NMEA 2000 receive sentences including 127503 (AC Input Status), 127504 (AC Output Status), 127506 (DC Detailed Status), 127507 (Charger Status) & 127509 (Inverter Status).
• Changed the ‘RPM & Speed’ data item to ‘RPM & SOG’ in the Data application.
• Added ‘Battery Charge’ data item.
• Fixes Crusader Engine Alarm issue whereby multiple engine alarms raised at ignition ON, only affects the decoding of the two engine status bytes in 127489.
• Improved Digital Switching alarm handling.

• Navionics Auto Routing
• Improved Alarm Management
• Radar Overlay - Using COG (Course Over Ground)
• Shared Preferences Scheme
• Lighthouse Charts Update
• Lighthouse Media ID File
• ECO-Mode with Honda Engine (Direct Connection)
• RMK-9 Keypad Software Update - v11.16
• Global Limitations of Use Screen at Power On
• Waypoint Arrival Alarm - Enable/Disable
• Fixed - Sonar Databar Icon
• Fixed - No Data Viewed in Drop-Down in Danish Language
• Fixed - Incorrect Wind Data on Graphic Data Page
• User handbook updated
• Additional Language Support
  • Hebrew

• Support for the GPS/GLONASS function for the built-in module and the external GA150 GPS/GLONASS antenna accessory for the new a Series a9x & a12x display products
• Support for the HD-SDI Video Input & 4:3 aspect ratio on the new gS Series gS195 display product
• Increase of the internal GPS refresh to 5Hz for the existing a, c & e Series Multifunction display products
• Add Multifunction display network compatibility with v3.xx software of CP300 & CP450C sounder modules
• Added additional languages - Hebrew

Important Note: LightHouse II Version 10.40 application software has been recalled due to instances when using vessel offset whereby the vessel’s position can be drawn incorrectly on the chart. Installations of v10.40 should be replaced with v10.41 immediately.

• Support for multiple active sonar modules on the network
• Ability to display multiple sonar channels simultaneously
• Ability to create custom sonar channel profiles
• New horizontal split screen fishfinder page
• Corrected TVG control on CP450c
• Added support for Navionics Sonar Log depth recordings
• Added support for Navionics Plotter Sync (Requires appropriate Navionics mobile apps)
• Lighthouse Charts Updates
• Digital Switching Alarms
• Update to SIRUISXM Marine Zone Boundaries
• New Home Screen icons for Fishfinder app instances
• New Fishfinder Simulator modes
• AIS Dangerous Target Simulator Improvement - In Simulator mode it is defaulted to off.
• Additional Languages - Czech and Slovenian
• Various fixes and improvements

• Addresses a NMEA communication issue between the Mercury Helm Gateway with version 3.0.0 or earlier and Raymarine Multifunction display with LightHouse II version 9.40
• Fix for incorrect range synchronization between chart & radar application
• Fix for speed of Zero displayed when a CP100 & no speed transducer fitted
• Fix Italian & Norwegian language issue on Limitations of Use screen

• Raymarine Lighthouse Chart Support
• Redesigned User Interface
• Chart Data selection
• Navionics Sonar Chart support
• Navionics Freshest Data reminder
• Multitouch support for a Series multifunction displays
• Reorganization and Renaming of Menu items and structure
• Autohide Databar
• Increase of Waypoints (3000 Total, 100 Groups), Routes (150 containing 200 WTPs), Tracks (15 Tracks - 10000 points)
• GPX file formation support
• Waypoint Symbols
• Symbol Search
• Waypoint area search
• Multiple Sonar selection
• Distance unit setup (ability to set upper and lower denominations separately)
• Expanded ETA & TTG data items
• Expanded support of PGN 127489 (Engine alarms)
• Added DSC support over SeaTalkNG/NMEA2000
• Support for 8 displays (originally was 6)
• Sonar app - In absence of speed transducer system defaults to 'NONE' rather than default previously
• Various fixes and improvements
• User manual updated

• ECI100 improvements

• Engine Identification and Set-up, See Interim Sheet Instructions (Document: 82301-1)
• Support added for ECI-100 Universal Engine and Control Interface
• Thermal Camera App Improvements

• Support for CP100/CP300 Sonar Modules
• Various Performance improvements
• Speed transducers selection
• Navionics mSD chart card information
• Updated internal User manual

• Autopilot Control/Evolution Support
• Data Application Update
• IP Camera Record and Playback
• T200 Camera Integration and UI Controls
• Expanded Boat Details Options
• Fuel Manager - Additional PGN Support
• User Selectable Start-up App Page
• User Manual Added to Home Screen
• Support for RMK-9 (gS Series) Keypad
• Additional Language Support - Bulgarian

Please note In this release the ability to connect to legacy MFDs (E Series Wide and G Series) has been removed. It is recommended if this is your current configuration that you do not update to version 7.35 and remain at version 6.27. If you have updated to version 7.35 you can download version 6.27 below

• New Home screen with new icons
• Fusion-Link700 Series integration
• Sirius Audio user interface (US only)

• Solution for the internal sonar module to be directly connected to a 1kW transducer (600w Output Only)

• Fuel Management
• Expanded Engine Data and Alarms
• Document and Photo viewer (view your product manuals on your MFD)
• Thermal Camera Slew-to-cue integration
• IP Camera Support
• Ability to view NMEA 0183/SeaTalkng data statistics and buffer as well as save to mSD card
• Support for multiple thermal camera JCUs
• Thermal cameras OSD menu options now available directly from Thermal Camera application’s menu
• Video application now called Camera application
• Ability to automatically cycle through available video/camera feeds in the Camera application
• Support for up to 5 engines in the Data application
• Improved engine data selection in the Data application
• Support for detailed engine warning alarms
• Addition of Demo Video mode for retail
• On Screen Zoom keys added to Sirius Weather App (North America only)

• Support for e165

• Fixes error in v4.26 in regards to bearing

• Addition of on-screen range controls to the Chart & Radar applications
• Addition of on-screen Gain, Rain & Sea controls to Radar application
• Addition of on-screen Gain & TVG controls to Sonar application
• Addition of slider bar control adjustment
• Addition of new numeric adjustment controls
• Improved Power Key shortcuts to Brightness and Capture Screen image options

IMPORTANT NOTE: This software version was recalled

• Added support for Raymarine CP450C CHIRP Sonar Module
• Added support for AIS feature support for STEDS EAIS integration & display of SAR aircraft & SART devices
• Added limited support for Sirius Marine Weather Module
• Added Standby / PowerSave Mode
• Added support for RayRemote and RayControl Applications
• Enhanced home screen customize option permitting 9 and 12 inch MFDs to view up to 4 applications on a single page
• Default Fuel data page added
• Added Arabic language support
• Inclusion of Remote Upgrade Utility to permit the upload of software to peripheral Raymarine products using SeaTalk^ng / SeaTalk^hs  
• Display of Aids To Navigation (AToNs) AIS targets when data received on either SeaTalkng or NMEA 0183
• Added 1kW transducer support added to MFDs featuring internal ClearPulse Digital Sounder circuitry, transducer output limited to 600W
• Corrected the ability to select Tide and/or Current Station using the Find Nearest feature
• Added NMEA 0183 & SeaTalk^ng data monitors to the diagnostics features
• Increased touch area for Alarm pop-ups and Back buttons

• Cartography redraw performance has been improved when sharing cartography via the SeaTalk^hs/RayNet network
• Added support to display fuel flow rate
• Addition of NMEA 0183 and SeaTalk^ng data buffer diagnostics
• Improvements to databar customization
• Ability to manually change the aspect ratio of the Video application

• INITIAL RELEASE