Raymarine SeaTalkng Connections
Interconnection Bus for Raymarine Products
SeaTalkng is an interconnection bus for Raymarine products. Small diameter cable connectors are used throughout the system to make installation easier.
There's a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalkng products to the SeaTalkng backbone.
Whether you are looking to expand your current SeaTalkng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalkng.
Colour-coded cables
Cables and connectors are colour-coded for easy system identification and have quick-connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets.
- Backbone cables, plugs, sockets and terminators are coded blue.
- Spur cables, plugs, and sockets are coded white.
- SeaTalk to SeaTalkng converter cables, plugs and sockets are coded yellow.
- SeaTalkng power cables are coded red.
Connectivity
Transducer signals are easily converted to SeaTalkng with the iTC-5 component.
Converting Sea Talk1 to SeaTalkng
Specific Raymarine products (e.g. ST70 instruments) perform a bridging function, to enable you to connect SeaTalkng to SeaTalk1 products via appropriate adaptor cables.
Discover more about the SeaTalkng to SeaTalk1 converter kit
Adaptor cables are also available to connect NMEA2000 products.
Hardware
SeaTalkng comprises a single backbone terminated with two terminators, one at each end. Spur cables connect the backbone to individual SeaTalkng products.
Small diameter cable connectors are used throughout the system to make installations easier. Cables and connectors are colour-coded to reduce the likelihood of misconnection.
The SeaTalkng Backbone kit contains everything you need to construct and wire a basic SeaTalkng navigation network backbone on board your vessel. The kit contains the following components:
- A06031 SeaTalkng Terminators (Qty. 2)
- A06037 Backbone Cable, 20m
- A06036 Backbone Cable, 5m (Qty. 2)
- A06028 T-Piece (Qty. 4)
- A06049 Network Power Cable
- 81300 SeaTalkng Reference Manual
Note: ST70 Displays, transducer pods, transducers and network spurs are not included.
Raymarine SeaTalkng Starter Kit
SeaTalkng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end.
The SeaTalkng Starter Kit
The SeaTalkng Starter Kit is the perfect way to get started with your SeaTalkng compatible Raymarine product.
The 5-way connector forms the start of your SeaTalkng backbone and your SeaTalkng product is connected via a Spur Cable.
Starter Kit part number: T70134
What's in the kit?
- A06064: SeaTalkng 5-way Connector
- A06031: SeaTalkng Backbone Terminator (x2)
- A06040: SeaTalkng Spur Cable 3m
- A06049: SeaTalkng Power Cable
Example Starter Kit Setup
- SeaTalkng 5-way Connector
- SeaTalkng Backbone Terminators
- SeaTalkng Spur Cable connecting to an e7 unit (e7 sold separately)
- SeaTalkng Power Cable
- A22111: DST800 Transducer (sold separately)
Expanding your Starter Kit
As your Raymarine system expands, so can your starter kit. Additional backbone cables, plugs and sockets can be added so you can connect more products via spur cables. Learn more about SeaTalkng networking
Raymarine SeaTalk1 to SeaTalkng converter kit
Part Number: E22158
The SeaTalk1 to Seatalkng converter allows select SeaTalk1 devices to interface and communicate on the Raymarine SeaTalkng data network. It is compatible with legacy ST40, ST60+, Raystar 125 GPS sensors and LifeTag Wireless Man Overboard Systems.
The SeaTalk to SeaTalkng Converter kit is a compact solution that connects in-line with the SeaTalkng instrument network.
Key Features
- Easy plug-and-play connectivity with SeaTalkng networks.
- Works with select SeaTalk1 products; instruments, pilot heads, GPS sensors and LifeTag.
- Included SeaTalkng components establish basic backbone connectivity.
- Easily expanded using Raymarine SeaTalkng network components.
What is in the kit?
The converter kit includes all of the necessary components to interface to SeaTalk1 devices, and establish basic SeaTalkng connectivity on the vessel including:
- SeaTalk1 to SeaTalkng converter
- SeaTalkng Terminators (x2)
- SeaTalkng Blanking Plugs (x2)
- 1m (3.3-foot) SeaTalk1 to SeaTalkng converter cable
- SeaTalkng power cable
- 1m (3.3-foot) SeaTalkng spur cable
User Manuals and Documents
Whether you are looking to expand your current SeaTalkng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalkng.
Colour-coded cables
Cables and connectors are colour-coded for easy system identification and have quick-connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets.
- Backbone cables, plugs, sockets and terminators are coded blue.
- Spur cables, plugs, and sockets are coded white.
- SeaTalk to SeaTalkng converter cables, plugs and sockets are coded yellow.
- SeaTalkng power cables are coded red.
Connectivity
Transducer signals are easily converted to SeaTalkng with the iTC-5 component.
Converting Sea Talk1 to SeaTalkng
Specific Raymarine products (e.g. ST70 instruments) perform a bridging function, to enable you to connect SeaTalkng to SeaTalk1 products via appropriate adaptor cables.
Discover more about the SeaTalkng to SeaTalk1 converter kit
Adaptor cables are also available to connect NMEA2000 products.
Hardware
SeaTalkng comprises a single backbone terminated with two terminators, one at each end. Spur cables connect the backbone to individual SeaTalkng products.
Small diameter cable connectors are used throughout the system to make installations easier. Cables and connectors are colour-coded to reduce the likelihood of misconnection.
The SeaTalkng Backbone kit contains everything you need to construct and wire a basic SeaTalkng navigation network backbone on board your vessel. The kit contains the following components:
- A06031 SeaTalkng Terminators (Qty. 2)
- A06037 Backbone Cable, 20m
- A06036 Backbone Cable, 5m (Qty. 2)
- A06028 T-Piece (Qty. 4)
- A06049 Network Power Cable
- 81300 SeaTalkng Reference Manual
Note: ST70 Displays, transducer pods, transducers and network spurs are not included.
Raymarine SeaTalkng Starter Kit
SeaTalkng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end.
The SeaTalkng Starter Kit
The SeaTalkng Starter Kit is the perfect way to get started with your SeaTalkng compatible Raymarine product.
The 5-way connector forms the start of your SeaTalkng backbone and your SeaTalkng product is connected via a Spur Cable.
Starter Kit part number: T70134
What's in the kit?
- A06064: SeaTalkng 5-way Connector
- A06031: SeaTalkng Backbone Terminator (x2)
- A06040: SeaTalkng Spur Cable 3m
- A06049: SeaTalkng Power Cable
Example Starter Kit Setup
- SeaTalkng 5-way Connector
- SeaTalkng Backbone Terminators
- SeaTalkng Spur Cable connecting to an e7 unit (e7 sold separately)
- SeaTalkng Power Cable
- A22111: DST800 Transducer (sold separately)
Expanding your Starter Kit
As your Raymarine system expands, so can your starter kit. Additional backbone cables, plugs and sockets can be added so you can connect more products via spur cables. Learn more about SeaTalkng networking
Raymarine SeaTalk1 to SeaTalkng converter kit
Part Number: E22158
The SeaTalk1 to Seatalkng converter allows select SeaTalk1 devices to interface and communicate on the Raymarine SeaTalkng data network. It is compatible with legacy ST40, ST60+, Raystar 125 GPS sensors and LifeTag Wireless Man Overboard Systems.
The SeaTalk to SeaTalkng Converter kit is a compact solution that connects in-line with the SeaTalkng instrument network.
Key Features
- Easy plug-and-play connectivity with SeaTalkng networks.
- Works with select SeaTalk1 products; instruments, pilot heads, GPS sensors and LifeTag.
- Included SeaTalkng components establish basic backbone connectivity.
- Easily expanded using Raymarine SeaTalkng network components.
What is in the kit?
The converter kit includes all of the necessary components to interface to SeaTalk1 devices, and establish basic SeaTalkng connectivity on the vessel including:
- SeaTalk1 to SeaTalkng converter
- SeaTalkng Terminators (x2)
- SeaTalkng Blanking Plugs (x2)
- 1m (3.3-foot) SeaTalk1 to SeaTalkng converter cable
- SeaTalkng power cable
- 1m (3.3-foot) SeaTalkng spur cable
